Ozone Purification System
For additional water purification, less maintenance, and reduction of harsh chemicals, an ozone purification system can be added to your Tuff Spa. The installation of an ozone unit is simple and affordable. Our ozone system produces the strongest oxidizer available on the market. This odorless, vaporless ozone system oxidizes your water, reducing chemical consumption by up to 80%, offering bathers a near chemical free environment.
Manuals
⇨ Click Here to Download the User’s Manual
⇨ Click Here to Download the TUFF Troubleshooting Guide
⇨ Click Here to Download the TUFF Top-Side Controls Manual
Warranty
⇨ Click Here to Download the Warranty Card including Full Details
Warranty Terms |
|
|---|---|
| Shell & Hard Cover (Parts & Labor) | Lifetime |
| Equipment (Parts & Labor) | 3 yr. |
| Parts (Parts & Labor) | 1 yr. |
| Labor | 1 yr. |
Spa Diagram
This diagram is NOT drawn to scale. It is only intended to give an approximate location of the important spa parts to prepare for installation.
Clearances
Width: 30″
Height: 54″
These clearances MUST be continuous from the street to the final spa location unless using a Crane. For more information, please visit our Prep Location page.
Foundation
The Hot Tub must have a solid, level foundation.
- Any flat, level surface including grass, wood, gravel, brick, pavers, concrete, or an Easy Pad (which can be purchased here).
Hot tub must be level for consistent water level and proper filtration.
Electrical
240V/50A -or- 120V/20A
| w/ 4kW Heater (240V) | |
|---|---|
| 2 Hots | 8 Gauge (black/red) |
| 1 Neutral | 8 Gauge (white) |
| 1 Ground | 10 Gauge (green) |
| w/ 1kW Heater (120V) | |
| 1 Hots | 12 Gauge (black) |
| 1 Neutral | 12 Gauge (white) |
| 1 Ground | 12 Gauge (green) |
All circuits MUST be GFI Protected at the main electrical panel or at a remote disconnect.
Must include SealTite whip at spa end with wires extending at least 6″ past end of SealTite. Length of SealTite whip must be long enough to reach the Control Pack (See Spa Diagram for the location of the Control Pack)
For more information on spa electrical requirements, please visit our Spa Electric page.
- Features
- Options
-
Ozone Purification System
For additional water purification, less maintenance, and reduction of harsh chemicals, an ozone purification system can be added to your Tuff Spa. The installation of an ozone unit is simple and affordable. Our ozone system produces the strongest oxidizer available on the market. This odorless, vaporless ozone system oxidizes your water, reducing chemical consumption by up to 80%, offering bathers a near chemical free environment.
- Docs
-
Manuals
⇨ Click Here to Download the User’s Manual
⇨ Click Here to Download the TUFF Troubleshooting Guide
⇨ Click Here to Download the TUFF Top-Side Controls Manual
Warranty
⇨ Click Here to Download the Warranty Card including Full Details
Warranty Terms
Shell & Hard Cover (Parts & Labor) Lifetime Equipment (Parts & Labor) 3 yr. Parts (Parts & Labor) 1 yr. Labor 1 yr. - Prep
-
Spa Diagram
A graphic detailing where installers will need electrical and plumbing for the Tuff Spas 150 TT150 Stub Location This diagram is NOT drawn to scale. It is only intended to give an approximate location of the important spa parts to prepare for installation.
Clearances
Width: 30″
Height: 54″These clearances MUST be continuous from the street to the final spa location unless using a Crane. For more information, please visit our Prep Location page.
Foundation
The Hot Tub must have a solid, level foundation.
- Any flat, level surface including grass, wood, gravel, brick, pavers, concrete, or an Easy Pad (which can be purchased here).
Hot tub must be level for consistent water level and proper filtration.
Electrical
240V/50A -or- 120V/20A
w/ 4kW Heater (240V) 2 Hots 8 Gauge (black/red) 1 Neutral 8 Gauge (white) 1 Ground 10 Gauge (green) w/ 1kW Heater (120V) 1 Hots 12 Gauge (black) 1 Neutral 12 Gauge (white) 1 Ground 12 Gauge (green) All circuits MUST be GFI Protected at the main electrical panel or at a remote disconnect.
Must include SealTite whip at spa end with wires extending at least 6″ past end of SealTite. Length of SealTite whip must be long enough to reach the Control Pack (See Spa Diagram for the location of the Control Pack)
For more information on spa electrical requirements, please visit our Spa Electric page.
