AMERICAN WHIRLPOOL 151 SPA

AMERICAN WHIRLPOOL MODEL 151

The American Whirlpool® 151 offers a quaint experience with seating for up to three people, including a lounge seat equipped with calf and foot jets.

SEATS SIZE JETS PUMPS
3 83″ x 63″ x 30″ 20 1x 3bhp
ELECTRIC WATER CAPACITY WEIGHT (E/F)
120V/60A or 240V/50A 182 US Gallons 604 / 2204 lbs

GET A QUOTE ON THE AMERICAN WHIRLPOOL 151 SPA

Interested in the American Whirlpool 151 spa? Complete the form and we’ll be in touch with a quote plus estimated delivery charges and a delivery timeframe. Note we can only sell, deliver and install in select Southern California counties.

Thank you for your interest in Custom Spas Direct!

LEARN MORE ABOUT THE 151

CLICK TO VIEW THE 151'S KEY FEATURES
American Whirlpool pump
Pump 1: 56 Frame 2-Speed 3bHp, 115VAmerican Whirlpool is the first fully-electronic hot tub, including the pumps, which prolongs overall life of the spa.
DuraMAAXâ„¢ Cabinetry
DuraMAAX™ CabinetryDuraMAAx® is a state of the art wood-alternative material that has the look and feel of natural wood, without the maintenance. The material is impact resistant, impervious to weather or insect damage and will never splinter, crack, or rot. The attractive exterior locks in heat and seals out cold air providing a beautiful look and feel.
Frozen ice
Freeze Protection SystemIf the temperature sensors within the heater detect a low enough temperature, then the spa control system will automatically activate the pumps to provide freeze protection. Moving water is unable to freeze, so the system will either run the pumps continuously or periodically depending on conditions.
Temperature gauge showing overheating
Overheat Protection SystemWhen sensing a water temperature above 108°F (42°C), the system will automatically shut down the heater until the temperature falls below 108°F (42°C). Once below 108°F (42°C), the system will resume normal operation.
Programmable Filter Cycles
Programmable Filter CyclesProgrammable filter cycles allow spa users to designate when it is most convenient for the spa to clean itself and can utilize their system for an extra clean spa before guests arrive.
3.5″ LED Underwater Spa Light
3.5″ LED Underwater Spa LightA 3.5-inch LED light in the footwell of the spa provides a mood-setting effect of your choice.
CleanZone® System
UPGRADE OPTION: CleanZone® SystemThe CleanZone® water purification system generates ozone to maintain healthy, crystal clear water while greatly reducing chemical maintenance.
Image of a hot tub lounge seat
LoungeLounge seats provide a reclined seating option with a head cushion and varying jet to promote complete relaxation.
A cutaway illustration of Thermo-Lockâ„¢ Insulation
Thermo-Lockâ„¢ InsulationThermo-Lock Insulation combines the elements of the ABS Sealed base, BlueMAAX, and the WeatherShield cover to lock in the heat of your spa from top to bottom.
Treated Wood Frame
Treated Wood FrameSpecially formulated preservatives are saturated deep into the wood to protect against rot and infestation, ensuring the long-term structural integrity of your spa.
Dynamic LED Lighting
Dynamic LED LightingThe large LED light in the footwell of the spa sets the mood for the entire spa.
HDPE Sealed Base cutaway image
HDPE Sealed BaseThe ABS Sealed base is an integral part of the support structure in an American Whirlpool® hot tub. Its one-piece construction provides a rugged foundation that seals the bottom of the spa, locking in heat and blocking out moisture.
CLICK TO VIEW THE ACRYLIC COLOR OPTIONS
Acrylic color options
acrylic-color2
acrylic-color3
acrylic-color4
CLICK FOR SITE PREPARATION FOR YOUR NEW 171

PHYSICAL CLEARANCES

Width: 33″
Height: 85″

These clearances MUST be continuous from the street to the final spa location unless using a Crane. For more information, please visit our Prep Location page.

SPA FOUNDATION

The Hot Tub must have a solid, level foundation.

Hot tub must be level for consistent water level and proper filtration.

ELECTRICAL

240V / 50A

2 Hots 8 Gauge (black/red)
1 Neutral 8 Gauge (white)
1 Ground 10 Gauge (green)

All circuits MUST be GFI protected at the main electrical panel or at a remote disconnect.

Must include SealTite whip at spa end with wires extending at least 6″ past end of SealTite. Length of SealTite whip must be long enough to reach the Control Pack (See Spa Diagram for the location of the Control Pack)

For more information on spa electrical requirements, please visit our Spa Electric page.

SEATING DEPTH CHART

CLICK FOR WARRANTY INFORMATION

WARRANTY CARD

WARRANTY TERMS

ITEM DURATION
Limited Vessel Structure Warranty 1 year
Limited Surface Warranty 1 year
Limited Equipment, Plumbing Warranty 1 year
Limited Jet Insert Warranty 1 year
Limited Side Panel Warranty 1 year
Limited Digital Optics Warranty 1 year
UPGRADES – Limited Warranty 1 year
Limited Headrest, Skimmer Lid, & Diverter Valve Warranty 90 days

GET OUR FREE NEWSLETTER

Be the first to learn about new spa models, specials and discounts, shows and more!

FOLLOW US ON SOCIAL MEDIA

0